Crankshaft Dimensions/Torque

Crankshaft dimensions






Main Bearing Torque (Guide Frame)





Installing guide frame
- Replace bolts - 1 to 20 -.
- Tighten bolts for guide frame as follows:
- Tighten bolts - 1 to 10 - using torque wrench to 30 Nm.
- Tighten bolts - 11 to 20 - using torque wrench to 20 Nm.
- Tighten bolts - 1 to 10 - using torque wrench to 50 Nm.
- Tighten bolts - 11 to 20 - using torque wrench to 30 Nm.
- Tighten bolts - 1 to 10 - 90° (1/4 additional turn) using a rigid wrench.
- Tighten bolts - 11 to 20 - 90° (1/4 additional turn) using a rigid wrench.
- Tighten bolts for sealing surfaces of cylinder block/guide frame - dark hatching in illustration - to 9 Nm in diagonal sequence.