Tire Monitoring System, Function

Function
The system monitors tire inflation pressures set and specified for monitoring.
First the following steps are required:

Checking and correction of tire Inflation pressures
^ Start by checking and correcting tire inflation pressures of wheels on vehicle (including spare wheel).

Storage of inflation pressures
After checking inflation pressures and properly inflating tires, current pressures have to be stored in monitoring system. System then implements automatic adaptation process.
Proceed as follows:
^ Switch ignition on and call up start menu.
Access setting menu by way of menu Setting Inflation pressure.
^ Enter a tick (3) in front of Store pressures.
System acknowledges correct reception of storage request with the message:

Current Inflation pressures stored
^ Move arrow to Return to exit from input menu.

Note: After altering inflation pressure and changing wheel by selecting Store pressures. Process of adaptation to new monitoring conditions must always be re-started.