Adaptation (Function 10)
Adaptation (function 10)
Antenna diagnosis can be activated using the "Adaptation" function.
Adaptation table:
Perform Function "10 - Adaptation"
Display:
^ Press Buttons 1 and 0 (10 selects the "Adaptation" function).
Display:
^ Confirm entry using the Q button.
Display:
^ Enter required Adaptation channel 17.
^ Confirm entry using the Q button.
Display
^ Press the (arrow) button.
Display
^ Keyboard entry: 0001
Display
^ Confirm entry using the Q button.
Display
^ Confirm entry using the Q button.
Display
^ Press the (arrow) button.
The following must now be displayed in Channel 17:
Display
^ Press the (arrow) button.
The following must now be displayed in measured value block 021:
Display:
When antenna diagnosis is completed:
Display
^ Press the (arrow) button.
^ Read out the DTC memory
^ Press Buttons 0 and 6 (06 selects the "End Output' function)
Display: