Camshaft Bearing

Double bearing cap 10 Nm (7 ft. lbs.)
Exhaust camshaft
Check radial clearance using Plastigage (lever removed):
Wear limit: 0.1 mm (0.0039 inch)
Maximum run-out: 0.01 mm (0.0004 inch)
Intake camshaft bearing cap 10 Nm (7 ft. lbs.)
Exhaust camshaft bearing cap 10 Nm (7 ft. lbs.)
Intake camshaft
^ Check radial clearance using Plastigage (lever removed):
Wear limit: 0.1 mm (0.0039 inch)
Maximum runout: 0.01 mm (0.0004 inch)
Mechanical camshaft adjuster 10 Nm (7 ft. lbs.)
Rotor for Camshaft Position (CMP) sensor 23 Nm (17 ft. lbs.)
Camshaft Position (CMP) sensor 5 Nm (44 inch lbs.) + 90°
Shaft for valve roller lever, intake side 9 Nm (80 inch lbs.)
Shaft for valve roller lever, exhaust side 55 Nm (41 ft. lbs.)