Glove Compartment, Assembly Overview

Glove Compartment, Assembly Overview







1 - Instrument panel
2 - Instrument panel cover, right
- Removing
3 - Glove compartment
- Removing
- Remove instrument panel cover - 2 -.
- Open glove compartment lid.
- Remove three bolts - 4 - in recesses at top of glove compartment - 3 -.
- Remove bolts - 5 - (2x) from underneath (footwell).
- For vehicles with CD changer - 8 -: Remove bolt - 6 -.
- Vehicles with insulation box: Remove vent.
- Pull out glove compartment downward.
- Disconnect connector - 7 - from glove compartment light.
- Disconnect connectors to electrical components in glove compartment (if applicable).
4 - Bolts (3x)
- Tightening torque 3.5 Nm
5 - Bolts (2x)
- Tightening torque 3.5 Nm
6 - Bolt
- Tightening torque 3.5 Nm
- Vehicles with CD changer only
7 - Connector
8 - CD changer







Removing right instrument panel cover

Special tools and workshop equipment required
- Front end hook 3370
- Removing:
- Remove right instrument panel cover - arrow - using front end hook 3370.