Easy-Entry Facility (Manual), Removing and Installing
Easy-entry Facility (manual), Removing And Installing
1 - Lever
2 - Pins (2x)
3 - Easy-entry facility (manual)
- Removing
- Move front seat forward as far as possible.
- Remove seat.
- Drill out rivet - 4 - at runner - 5 - and take out metal holders (2x) on inside of runner - 5 -.
- Press lever - 1 - until pins - 2 - (2x) are in runner- 5 - and pull runner- 5 - to rear in direction of - arrow -.
- Remove easy-entry facility - 3 -.
- Installing
- Guide easy-entry facility into runner.
- Installing easy-entry facility - 3 - in reverse order of removal.
4 - Rivet
5 - Runner
6 - Handle for length adjustment
Guiding easy-entry facility into runner
- Guide easy-entry facility - 2 - into runner - 3 -.
- Press lever - 1 - and slide easy-entry facility - 2 - forward.