Diagram 1/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated Oxygen Sensors (HO2S), Motronic Engine Control Module (ECM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S)

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC)

J220 - Motronic Engine Control Module (ECM)

T4a - 4-Pin Connector, green, connector station Heated Oxygen Sensor (HO2S) (firewall)

T6 - 6-Pin Connector, black, connector station Heated Oxygen Sensor (HO2S) (firewall)

Z19 - Oxygen Sensor (O2S) Heater

Z29 - Oxygen Sensor (O2S) Heater 1 Behind Three Way Catalytic converter (TWC)

(220) - Ground connection (sensor Ground), in engine wiring harness

(316) - Ground connection (sensor Ground -2-), in engine wiring harness

Previous Diagram 1/9 (Tracks 99-112)

Next Diagram 1/11 (Tracks 127-140)