All Wheel Drive
Wheel bearing housing (steel) all wheel drive, servicing
Special tools, testers and auxiliary items required
^ Thrust plate VW 401
^ Punch VW 408 A
^ Thrust disc VW 412
^ Tube 60 mm dia. VW 415 A
^ Thrust plate 2050
^ Thrust plate 3005
^ Assembly tool 3253/1
^ Press tool 3345
^ Press tube 30-100
1 - Wheel bearing housing
^ Removing and installing
2 - Wheel bearing
^ Stepped internal diameter
^ Installation position: Larger internal diameter of wheel bearing faces wheel hub
^ Pressing out
^ Pressing in
3 - Splash plate
4 - Wheel hub
^ Stepped version
^ Pressing out
^ Pressing in
^ Lightweight wheel hub
5 - Torx bolt
^ Tightening torque
6 - Rubber bushing
^ Removing
^ Installing
Pressing out wheel hub
Note:
^ The wheel bearing housing must rest against the milled surface of the bolt holes.
Pressing wheel bearing out of wheel bearing housing
Note:
^ The wheel bearing housing must rest against the milled surface of the bolt holes.
Pressing wheel bearing into wheel bearing housing
- Wheel bearing has stepped internal diameter.
Note:
^ Larger internal diameter of wheel bearing faces wheel hub
- Press in wheel bearing - A - onto stop.
Pressing wheel hub into wheel bearing
- Position wheel hub - B - and press in onto stop by applying pressure to wheel bearing inner race.
Note:
^ Tube 60 mm dia. VW 415 A must press against center of bearing inner race.