Diagram 1/7 (Tracks 71-84)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Engine Coolant Temperature Sensor, valves for camshaft adjustment, After-Run Coolant Pump, Engine Coolant Level Warning Switch
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
F66 - Engine Coolant Level (ECL) Warning Switch
G2 - Engine Coolant Temperature (ECT) Sensor
G62 - Engine Coolant Temperature (ECT) Sensor
J151 - Coolant Circulation Pump Relay
J220 - Motronic Engine Control Module (ECM)
N205 - Valve -1- for camshaft adjustment
N208 - Valve -2- for camshaft adjustment
N318 - Camshaft Adjustment Valve 1 (exhaust)
N319 - Camshaft Adjustment Valve 2 (exhaust)
V51 - After-Run Coolant Pump
T10 - 10-Pin Connector, black, connector station E-box, plenum chamber
(83) - Ground connection -1-, in right front wiring harness
(220) - Ground connection (sensor Ground), in engine wiring harness
(269) - Ground connection (sensor Ground) -1-, in instrument panel wiring harness
(327) - Ground connection (sensor Ground), in engine compartment wiring harness
(E7) - Plus connection (87a), in Motronic Multiport Fuel Injection (MFI) wiring harness
* - Where applicable
Previous Diagram 1/6 (Tracks 57-70)
Next Diagram 1/8 (Tracks 85-98)