Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing
Removing
- Remove driver side storage tray.
- Disconnect electrical connector -2-.
- Remove bolts -1- and -3-.
- Remove accelerator pedal module.
Installing
Installation is in reverse order of removal. Note the following:
- Install driver side storage tray.
Vehicles with automatic transmission:
On vehicles with automatic transmission, the kick-down function must be adapted if the throttle position sensor or engine control module are replaced.
Torque specifications
Component Nm
Accelerator pedal module to pedal mount 10