Diagram 65/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Crash sensor and igniter for side airbag rear, driver side and passenger side





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G256 - Crash sensor for side airbag rear, driver's side

G257 - Crash sensor for side airbag rear, passenger side

J234 - Airbag Control Module

N201 - Igniter for side airbag rear, driver's side

N202 - Igniter for side airbag rear, passenger side

T4i - 4-Pin Connector, yellow, connector station: passenger compartment, rear left

T4j - 4-Pin Connector, yellow, connector station: passenger compartment, rear right

(109) - Ground connection, in airbag wiring harness

(312) - Ground Connection 2 (in Airbag wiring harness)

- Short circuit bridge becomes effective when connector is unplugged

Previous Diagram 65/5 (Tracks 43-56)

Next Diagram 65/7 (Tracks 71-84)