Diagram 57/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Central control module for comfort system, Door control module, driver side with window regulator, Switch for window regulator, Vehicle Inclination Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E39 - Safety switch for window regulator rear

E40 - Switch for window regulator front left

E41 - Switch for window regulator front right

E53 - Switch for window regulator rear left, driver

E55 - Switch for window regulator rear right, driver

G384 - Vehicle Inclination Sensor

J386 - Door control module, driver side

J393 - Central control module for comfort system

T10e - 10-Pin Connector, black, on door control module, driver's door

T12h - 12-Pin Connector, black, on central control module for comfort system (used to be Connector 1)

T16i - 16-Pin Connector, brown, on central control module for comfort system (used to be Connector 5)

T20 - 20-Pin Connector, black, door A-pillar, left

T32c - 32-Pin Connector, grey, door control module, driver's door

V14 - Left Window Motor

(44) - Ground connection (lower left A-pillar)

(A146) - Comfort System High-bus Connection (in instrument panel wiring harness)

(A147) - Comfort System Low-bus Connection (in instrument panel wiring harness)

(B207) - Connection (comfort), in passenger compartment wiring harness

* - without additional lighting equipment only

** - with additional lighting equipment only

Previous Diagram 57/13 (Tracks 155-168)

Next Diagram 57/15 (Tracks 183-196)