Diagram 9/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve, Secondary Air Injection (AIR) Solenoid Valve, Intake Manifold Change-Over Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G70 - Mass Air Flow (MAF) Sensor Locations

J220 - Motronic Engine Control Module (ECM)

J293 - Coolant FC (Fan Control) Control Module

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Exhaust System

N156 - Intake Manifold Change-Over Valve Locations

T10a - 10-Pin Connector, brown, connector station E-box, plenum chamber

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

(D22) - Connector (over fuse 234), in wiring harness front, right

Previous Diagram 9/5 (Tracks 43-56)

Next Diagram 9/7 (Tracks 71-84)