Diagram 9/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Engine Coolant Temperature (ECT) Sensor, Valves for camshaft adjustment, After-Run Coolant Pump, Engine Coolant Level (ECL) Warning Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G2 - Engine Coolant Temperature (ECT) Sensor

G62 - Engine Coolant Temperature (ECT) Sensor Locations

J151 - Coolant Circulation Pump Relay

J220 - Motronic Engine Control Module (ECM)

N205 - Valve -1- for camshaft adjustment Locations

N208 - Valve -2- for camshaft adjustment Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

N319 - Camshaft Adjustment Valve 2 (exhaust) Locations

V51 - After-Run Coolant Pump

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

(83) - Ground connection -1-, in right front wiring harness

(220) - Ground connection (sensor Ground), in engine wiring harness

(269) - Ground connection (sensor Ground) -1-, in instrument panel wiring harness

(327) - Ground connection (sensor Ground), in engine compartment wiring harness

(E7) - Plus connection (87a), in Motronic Multiport Fuel Injection (MFI) wiring harness

* - Hot climates only

Previous Diagram 9/6 (Tracks 57-70)

Next Diagram 9/8 (Tracks 85-98)