Diagram 65/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Igniters for belt tensioner rear, Seat Belt Switches, Left Front Seatbelt Microswitch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Left Seat Belt Switch

E25 - Right Seat Belt Switch

F140 - Left Front Seatbelt Microswitch

F141 - Right Front Safety Belt Microswitch

J234 - Airbag Control Module

N196 - Igniter for belt tensioner rear, driver's side

N197 - Igniter for belt tensioner rear, passenger side

N198 - Igniter for belt tensioner, rear, center

T8b - 8-Pin Connector, black, passenger compartment: near driver's Seat

T8c - 8-Pin Connector, black, passenger compartment: near passenger's Seat

(109) - Ground connection, in airbag wiring harness

(277) - Ground connector -3-, in wiring harness interior

* - with Seat Belt Switch only

** - with Igniter for belt tensioner rear only

*** - with Safety Belt Warning System only

Previous Diagram 65/6 (Tracks 57-70)

Next Diagram 65/8 (Tracks 85-98)