Diagram 105/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Side Airbag Crash Sensor, Driver's Side Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G179 - Driver's Side Airbag Crash Sensor Airbag Crash Sensors

G180 - Front Passenger's Side Airbag Crash Sensor Airbag Crash Sensors

J234 - Airbag Control Module

N199 - Driver's Side Airbag Igniter Airbag Component Location

N200 - Front Passenger's Side Airbag Igniter Airbag Component Location

T3c - 3-Pin Connector, yellow, passenger compartment near driver's Seat

T3d - 3-Pin Connector, yellow, passenger compartment near passenger's Seat

T20 - 20-Pin Connector, black, door A-pillar, left

T20a - 20-Pin Connector, black, door A-pillar, right

(109) - Ground Connection (in airbag wiring harness)

* - without RS4 seats only

** - with RS4 seats only

*** - dummy resistance

- Short circuit bridge becomes effective when connector is unplugged

Previous Diagram 105/4 (Tracks 29-42)

Next Diagram 105/6 (Tracks 57-70)