Diagram 109/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Brake Fluid Level Warning Switch, Oil Pressure Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator (GEN)

F1 - Oil Pressure Switch Locations

F34 - Brake Fluid Level Warning Switch ABS/Electronic Stabilization Program Overview

G5 - Tachometer

J234 - Airbag Control Module

J285 - Instrument Cluster Control Module

J623 - Engine Control Module (ECM) Locations

K2 - Generator (GEN) Warning Lamp

K75 - Airbag Malfunction Indicator Lamp (MIL)

T10c - 10-Pin Connector, violet, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

T32a - 32-Pin Connector, green, on instrument panel insert

(121) - Ground Connection 2 (in right front wiring harness)

(261) - Ground Connection (in heated spray jet wiring harness)

(A17) - Connection (61) (in instrument panel wiring harness)

(A121) - High-Bus Connection (in instrument panel wiring harness)

(A122) - Low-Bus Connection (in instrument panel wiring harness)

(D66) - Plus Connection (61) (in engine compartment wiring harness)

* - => Current wiring diagram for engine

Previous Diagram 109/20 (Tracks 253-266)

Next Diagram 109/22 (Tracks 281-294)