Diagram 56/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Air Quality Sensor, A/C Compressor Regulator Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G238 - Air Quality Sensor Components in Engine Compartment and Rear

J255 - Climatronic Control Module Components Inside Passenger Compartment

N280 - A/C Compressor Regulator Valve Components in Engine Compartment and Rear

T10c - 10-Pin Connector, violet, connector station A-pillar, left

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

(12) - Ground Connection (in engine compartment, left) Component Locations Overview in engine Compartment

(18) - Ground Connection (on engine block) Component Locations Overview in engine Compartment

(83) - Ground Connection 1 (in right front wiring harness)

(85) - Ground Connection 1 (in engine compartment wiring harness)

(121) - Ground Connection 2 (in right front wiring harness)

(261) - Ground Connection (in heated spray jet wiring harness)

(A38) - Plus Connection 2 (15a) (in instrument panel wiring harness)

* - with sensor for air quality only

*** - 6.0 mm2 cross-section where applicable

**** - for engine codes BHF, BBK only

***** - for engine codes BNS from 2006 m. y. only

# - for engine codes BGB, BPG, BWE, BYK, BWT only

## - for engine codes BNS from 2007 m. y. only

Previous Diagram 56/6 (Tracks 57-70)

Next Diagram 56/8 (Tracks 85-98)