Exploded Views

Power steering pump, reservoir and hydraulic lines, overview (vehicles with 6-cyl. engine)





1 - Power steering gear

2 - Expansion hose
3 - Return hose
4 - Cap with dipstick
^ Check fluid level

5 - Hex bolt, 5 Nm
6 - Reservoir
^ Re-fill with hydraulic fluid, Part No. G 002 000

7 - Rubber bushing
8 - Clamp
^ Use V.A.G 1275 to tighten
^ Always replace

9 - Return hose
^ Between reservoir and cooling line

10 - Clamp
^ Use V.A.G 1275 to tighten
^ Always replace

11 - Hex bolt, 10 Nm
12 - Cooling line
13 - Cable tie
14 - Hose clip
^ Use V.A.G 1275 to tighten
^ Always replace

15 - Intake hose
^ Installation position

16 - Clamp
^ Use V.A.G 1275 to tighten
^ Always replace

17 - Intake hose
^ Installation position

18 - Clamp
^ Use V.A.G 1275 to tighten
^ Always replace

19 - Power steering pump
^ For 6-cyl. gasoline engines
^ For correct version see Parts catalog
^ Fill with fluid before installing [] Note Power steering pump, reservoir and hydraulic lines, assembly overview

20 - Oil seal
^ Always replace

21 - Pressure hose
22 - Seal
^ Always replace

23 - Banjo bolt, 50 Nm
24 - Hex bolt, 8 Nm
25 - Pressure hose connection, 40 Nm