Front Suspension

Stabilizer bar, removing and installing

Special tools, testers and auxiliary items required

Torque wrench V.A.G 1331:

Removing
- Remove sound insulation.





- Remove bolt -2-.





- Remove hex nuts - 2 -.
- Remove stabilizer bar.

Installing

Note:
^ If stabilizer bar is replaced, check the suspension version installed on the vehicle.
^ Stabilizer bar and bushing must be free of grease.





- Install new nuts - 2 -, but do not tighten.





- Install and tighten new bolt -2-.





- Tighten nuts - 2 - to 25 Nm.
- Install sound insulation.