Windows and Glass: Service Precautions

Minimum Curing Times

CAUTION:
- For safety reasons, use only electrically non-conductive 2C-adhesive when installing windshield and rear window using the materials listed below.
- Vehicle is only safe for operation after minimum curing time has elapsed and only then may it be used.







Cleaning when soiled by adhesive sealing material
- Adhesive removal solution D 002 000 10 is the recommended cleaning solution. Observe safety precautions when processing.

CAUTION: When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint surfaces:
- First, clean paint surfaces with a dry cloth. Remove further material using adhesive removal solution D 002 000 10.

Plastic trim:
- Allow adhesive sealing material to harden (about 1 hour) and then peel off.