Glove Compartment Lock Handle (Vehicles With Knee Bolster), Removing and Installing

Glove Compartment Lock Handle (vehicles With Knee Bolster), Removing And Installing

- Removing
- Open glove compartment lid - 2 -.
- Use a screwdriver to carefully pry cover - 1 - from glove compartment lid.







- Remove bolt - 4 - from handle - 3 - on left side of glove compartment.
- Use a screwdriver to carefully press central locking lever - 5 - out of glove compartment lock.
- Remove handle - 3 - from glove compartment lid.

- Installing
- Installation is in reverse order of removal.