Window Regulator

Window Regulator

• Position of adjusting screws and nuts should be marked before loosening.

Removing

- Remove door trim.

- Mark position of screws and nuts.

- Run window all the way up.

- Remove window => [ Door Window Assembly Overview ] Door Window Assembly Overview.

- Remove window regulator motor => [ Window Regulator Motor ] Service and Repair.

- Remove bass speaker.

- Remove rearview mirror => [ Exterior Rearview Mirror Unit ] Exterior Rearview Mirror Unit.

- Remove bolts - 1 -, - 3 - and - 4 -.





- Unclip cables.

- Tip rear lower linkage - 5 - forward.

- Tip front upper linkage - 2 - back.

- Remove window regulator from door.

Installing

Installation is reverse of removal.

- After installation, perform basic setting => [ Window Regulator Basic Setting ] Programming and Relearning.

Tightening torques => [ Window Regulator Assembly Overview ] Front Door Window Regulator Assembly Overview.