Rear Door Window Glass: Service and Repair

Window Regulator and Door Window, Separating





1 - Window frame

• Removing:

• Remove door trim.

• Window frame removed together with window regulator from door => [ Window Frame and Regulator ] Service and Repair.

• Door window - 4 - removed

• To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.

• Installation:

• When installing, make sure that guide rail, arrow - A -, runs parallel to guide arrow - B -.

• Tighten bolts - 7 - to 6 Nm.

2 - Triangular panel

• Before removing, disassemble window frame and window regulator.

• Unscrew bolt - 3 - and remove panel sideways.

3 - Countersunk screw

• 5 Nm

4 - Window

• Removing:

• Drive down door window fully.

• Unscrew bolts - 5 - and remove door windows from window regulator.

• Installation:

• Insert window into window regulator.

• Screw bolts - 5 - into window regulator, but do not tighten yet.

• Drive door window upward into window frame.

• Pull door window toward front into window guide on window frame at B-pillar and tighten bolts - 5 - to 4 Nm.

5 - Socket head bolt

• 4 Nm-0.5 Nm

6 - Window regulator

• Window frame removed together with window regulator from door => [ Window Frame and Regulator ] Service and Repair.

• Door window removed.

• To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.