Floor Covering, Removing and Installing

Floor Covering, Removing And Installing







1 - Floor Covering
- Removal:
- Remove right and left front seats.
- Remove rear seat bench: Vehicles through 10.04, vehicles from 11.04.
- Remove lower A-pillar trim on left and right.
- Remove lower B-pillar trim on left and right.
- Remove driver-side foot rest.
- Remove center console.
- Loosen wiring harness under center console.
- Remove buffer pad - 4 - beneath center console and remove bolt - 5 -.
- Remove wiring harness from vehicle.
- Remove air ducts to center console.
- Remove bolt - 3 - on front of carpet tab in footwell.
- Fold floor mat lengthwise and remove it from vehicle.

- Installing:

NOTE: Floor covering rips easily from cut-outs. Carefully install floor covering in vehicle.

- Fold new floor mat lengthwise and lay it in vehicle.
- Before installing a new floor mat - 1 - , remove transport web - 2 -.
- Install floor mat in reverse order of removal.

2 - Transport brace
3 - Screw
4 - Rubber plug
5 - Screw