Seat Forward/Back Adjustment Actuating Link

Seat Forward/Back Adjustment Actuating Link

Special tools, testers and auxiliary items required

• Pop rivet pliers (VAS 5072)





• Drill machine

• Drill bit dia. 4.0 mm

• Engine and transmission holder (VAS 6095)





• Fixture for seat repair (VAS 6136)





Removing

- Remove seat. Refer to => [ Seat ] Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove side trim on sill side. Refer to => [ Side Trim ] Side Trim.

- Remove the seat forward/back adjustment handle.





- Press cable sleeve in - direction of arrow A - out of bracket.

- Disengage the seat forward/back adjustment actuating link - 1 - from the release lever - arrow B -.

From May 2006:





- Drill out the pop rivets - arrows - with a 4.0 mm drill and remove the relay socket and wiring harness retaining plate - 1 -.

All Vehicles





- Release the securing clip - 4 - on the actuating link in the - direction of arrow A - and remove the clip upward - arrow B -.

- Release the retaining spring - 2 - with a narrow screwdriver - 3 -.

- Pull the seat rail release lever - 1 - up out of the wheel axis.

- Remove the seat forward/back adjustment actuating link.

Installing

To install, perform the steps used in removal in reverse order.