Operation CHARM: Car repair manuals for everyone.

Diagram 60/5 (Tracks 43-56)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module, Front Fog Lamps, Tail Lamps, License Plate Lamps, Rain/Lamp Recognition Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G397 - Rain/Light Recognition Sensor

J519 - Vehicle Electrical System Control Module

L22 - Left Front Fog Lamp

L23 - Right Front Fog Lamp

M2 - Right Tail Lamp

M4 - Left Tail Lamp

T4k - 4-Pin Connector, black, near front bumper

T4l - 4-Pin Connector, black, in rear lid

T17 - 17-Pin Connector, black, connector station A-pillar, left

T17g - 17-Pin Connector, dark brown, connector station A-pillar, left

T23 - 23-Pin Connector, black, on vehicle Electrical System Control Module

T32b - 32-Pin Connector, grey, on vehicle Electrical System Control Module

X - License Plate Lamp

(86) - Ground connection -1-, in rear wiring harness

(87) - Ground connection -2-, in rear wiring harness

(249) - Ground connection -2-, in wiring harness interior

(345) - Ground Connection (in bumper wiring harness)

(347) - Ground Connection (in roof wiring harness)

(B132) - Connector (license plate light) in wiring harness interior

(B528) - Connection (LIN-Bus) (in main wiring harness)

* - for avant, see applicable avant rear wiring diagram

Previous Diagram 60/4 (Tracks 29-42)

Next Diagram 60/6 (Tracks 57-70)