Diagram 95/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Transmission Control Module (TCM), CAN-Bus (Data bus), Clutch Pedal Starter Interlock Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F194 - Clutch Pedal Starter Interlock Switch Manual Transmission

J217 - Transmission Control Module (TCM)

J285 - Instrument Cluster Control Module

J623 - Engine Control Module (ECM) Locations

T16 - 16-Pin Connector, black, Data Link Connector (DLC), under instrument panel, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

T32a - 32-Pin Connector, green, on instrument cluster

T94 - 94-Pin Connector, black

(238) - Ground Connection 1 (in interior wiring harness))

(A76) - Wire connection (K-diagnosis wire), in instrument panel wiring harness

(A121) - Wire connection (High-bus), in instrument panel wiring harness

(A122) - Wire connection (Low-bus), in instrument panel wiring harness

(D159) - High-Bus Connection (in engine compartment wiring harness)

(D160) - Low-Bus Plus Connection (in engine compartment wiring harness)

* - Automatic transmission (AG6) only

** - Automatic transmission (multitronic 01J / multitronic 0AN) only

*** - Manual transmission only

^ - CAN-Bus (Data bus)

Previous Diagram 95/17 (Tracks 211-224)

Next Diagram 95/19 (Tracks 239-252)