Fuse Box

Relay and Fuse Panels

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Fuse Box

Removing

- Remove driver's storage compartment.

- Remove bolts - 1 - for fuse box- 2 -.





- Remove fuse box from center tube for instrument panel.

- Detach wiring harness on center tube for instrument panel and set aside.

- Cut cable tie - 1 -.





- Release cover for fuse box - arrows -.

- Pull fuses from fuse box.

- Pull off retaining strip for connectors - arrows - and remove connectors from fuse box.





- Unclip base - 1 -.

• Check the exact assignment for fuse carrier in the current wiring diagram.





•

Installing

Installation is reverse of removal, paying attention to the following:

• All cable ties opened or cut during removal must be reinstalled at the same locations during installation.

Tightening Specifications