Tire Pressure Monitoring System Usage

Tire Pressure Monitoring System Usage

Function:

Tire Pressure Monitoring System is controlled via the steering column or the control unit in the center console.

The system monitors the tire pressure you have set and entered for monitoring.

- You must first check, correct and save the tire pressures.

- Then check and correct the tire pressure for the tires on the vehicle (including spare tire) according to the specifications on the sticker on the fuel filler flap.

Save tire change or tire pressure via right steering column from steering wheel.

The correct saving of the specified values in the basic requirement for dependable tire pressure monitoring. After this, system will automatically perform teach-in process.

Proceed as follows:

- Switch ignition on.

- Press rest button on steering column.

- Using rocker switch, select "set" function in instrument cluster and acknowledge this with reset button.

- Using rocker switch, select "tire pressure" function in instrument cluster and acknowledge this with reset button.

- Using rocker switch, select "save pressures" or " tire change" function in instrument cluster and acknowledge with reset button.

Saving of tire pressures must be started after every change desired to the specified values and after every tire change.

Save tire change or tire pressures via control unit in center console.

The correct saving of the specified values in the basic requirement for dependable tire pressure monitoring. After this, system will automatically perform teach-in process.

- Switch ignition on.

- Press Menu button in center console.

- Using rotary switch, select "Systems" in CAR menu and acknowledge by pressing rotary switch.

- Using rotary switch, select "Set" in CAR menu and acknowledge by pressing rotary switch.

- Using rotary switch, select "Tire pressure" in CAR menu and acknowledge by pressing rotary switch.

- Using rotary switch, select "Save pressures" or " Tire change" in CAR menu and acknowledge by pressing rotary switch.

Saving of tire pressures must be started after every change desired to the specified values and after every tire change.

Recode Tire Pressure Monitoring Control Module (J502).

If Tire Pressure Monitoring Control Module (J502 ) is replaced, new control module must be coded. To do this, proceed as follows.

- Connect the Vehicle Diagnosis, Testing, and Information System (VAS 5051A) and select the function test using " Functions/Component selection".

Then

- "Chassis"

- "Tire Pressure Monitoring System"

- "01- On Board Diagnostic (OBD) capable systems"

- "J502 - Tire Pressure Monitoring Control Module"

- "Tire Pressure Monitoring functions"

- "J502 - Code control module"