Cover and Cushion For Backrest, Removing and Installing (Sport Seat, Standard Seat)

Cover And Cushion For Backrest, Removing And Installing (sport Seat, Standard Seat)

CAUTION: Observe safety precautions for work on airbags.

Separating Cover And Upholstery From Backrest Frame







1 - Backrest

- Removal:
- Remove seat: Vehicles until 10.04, vehicles from 11.04.
- Remove backrest: Vehicles until 10.04, vehicles from 11.04.
- Remove headrest.
- Remove headrest guides: Vehicles until 10.04, vehicles from 11.04.
- Remove backrest cover panel.
- Pry out lower grip channels - 3 - (3x).
- Disengage side grip channels - 2 - (2x).
- Remove backrest frame.
- Remove side airbag.
- Pry out plastic tabs - 4 - (5x).
- Remove upholstery with cover.

- Installing:
Installation is reverse of removal.
2 - Side fastening strips (2x)
3 - Lower fastening strips (3x)
4 - Plastic tabs (Qty. 5)

Separating cover from upholstery







1 - Cover

- Removal:
- Lever out grip channels - 4 - from plastic clips - 3 - using a screwdriver.

- Installing:
Installation is reverse of removal. Observe the following when doing so:
- Replaced damaged plastic clips.
2 - Upholstery
3 - Plastic clips
- Replace if damaged
4 - Fastening strips