Digital Radio Antenna through August 2008 and Antenna Amplifier 3 from September 2008

Digital Radio Antenna through August 2008 and Antenna Amplifier 3 from September 2008

The digital radio antenna (R183)/antenna amplifier 3 (R112) are behind the left D-pillar trim.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove left D-pillar trim panel.

- Disconnect connector - 2 - on digital radio antenna - 1 -.





- Remove screw - 3 - (2 Nm) and remove digital radio antenna - 1 - from D-pillar.

Installing

- Install in reverse order.