Grille In Front of Fresh-Air Intake, Removing and Installing

Grille In Front Of Fresh-air Intake, Removing And Installing

Removing
- Switch off ignition.
- Remove plenum chamber cover.

CAUTION: The two valves of the pump valve unit may be hot even if the engine is cold.

- Remove wiper arms and scuttle panel trim.
- Remove dome brace if necessary (not installed on all vehicles).
- Remove upper cover of air intake unit.







- Release fasteners - A - and remove grille for fresh-air intake - B - from air intake unit.

Installing
- Clean plenum chamber in area beneath air intake unit.
- Install grille for fresh-air intake - B - to air intake unit.
- Re-install components removed in reverse order.