Headrests With Locking Mechanism

Power Front Memory Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Power Front Memory Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.



Headrests with Locking Mechanism

Removing





- Push release button - 2 - in - direction of arrow A - and pull headrest - 1 - upward as far as possible - arrow B -, keep release button pushed while doing so.

- Press release button - 2 - on headrest - 1 - until stop - arrow -.





- Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.

- Remove headrest completely from headrest guides.

Installing

To install, perform the steps used in removal in reverse order.