Front Center Armrest, Retrofitting

Front Center Armrest, Retrofitting





- Remove rear center console. Refer to => [ Rear Center Console ] Rear Center Console.

- Remove front center console. Refer to => [ Front Center Console ] Front Center Console.

- Remove bolts - 1 - and - 2 - and nuts - 3 -.

- Disengage sides of carpet from center console frame - arrows -.

- Lift center console frame out of threaded pins and push back.

- Secure front center armrest support base to chassis with nuts on threaded pins - arrows -.





- Install center console frame. Refer to => [ Center Console Frame ] Center Console Frame.

- Install front center console. Refer to => [ Front Center Console ] Front Center Console.

If center armrest base cut-out is not imprinted on underside of rear center console:





- Draw measurements for center armrest base cut-out centered on top side of rear center console, as shown in illustration:

• Dimension - a - = 32 mm

• Dimension - b - = 10 mm

• Dimension - c - = 83 mm

- Create cut-out on rear center console for center armrest base according to drawing.

- Install rear center console. Refer to => [ Rear Center Console ] Rear Center Console.

- Insert front center armrest through cut-out on rear center console.





- Secure front center armrest to support base - arrow -.

- Connect electrical connectors - 1 - and - 2 -.

- Press rear center console vent down until locking tabs engage in installation opening.

Tightening Specifications