Central Locking SAFE Indicator Lamp

Central Locking SAFE Indicator Lamp

Removing

- Switch off ignition and remove ignition key.

- Remove front door trim.

- Release the retaining clips - arrows -.





- Remove the central locking LED - 1 - down out of the door trim - 2 -.

Installing

Install in reverse order of removal, observing the following:

• The new central locking -SAFE- indicator lamp (K133) must be connected with the door trim wiring harness.

- Disconnect the electrical wire and connect it with the new electrical wire for the central locking -SAFE- indicator lamp.

- Slide the central locking LED in until it engages audibly.

- Install front door trim.