Close Assist

Close Assist






1 Bolt

• 2.5 Nm

2 Left rear closing assist motor (V307)

• Remove the bolts and motor from the mount.

3 Mount

• Disconnect the cable from the motor when removing the mount from the door lock.

• Open the locking mechanisms - arrow - with a screwdriver and remove the motor with its mount.

• The retainers must audibly lock.

4 Cable

• Make sure the grommet for the cable is pushed all the way into the mount.

5 Rear Door

Cable, Removing and Installing





- Unclip the cable from the retainers - arrow - and remove it toward the rear.

- Guide the cable - 1 - out of the cable winder - 2 -.

- When installing, first insert the cable end into the cable winder.

- Place the cable 360° inside the groove in the cable winder.

- Push the cable into the guide and lock it in using the hooks.

- Push the grommet all the way into the mount.