Rear Lid Trim

Rear Lid Trim

Special tools, testers and auxiliary items required

• Pry lever (80-200)

Removing





- Remove warning triangle from bracket.

- Release both retaining springs - arrows - and remove warning triangle bracket - 1 -.

- Pry off cover - 1 - over lid lock with (80-200) in - direction of arrow -.





- Remove screws - arrows - on handle recesses - 1 -.





USA Only





- Unclip cover - 1 - on operating lever - 2 -.

- Disengage actuating link nipple - 3 - on operating lever.

- Remove screw behind operating lever.

All:





- Pry rear lid trim - 1 - off at places marked with - arrows - using (80-200).

USA Only

- Disengage rear housing on operating lever handle recess - 3 -.

Installation

To install, perform the steps used in removal in reverse order.

Tightening Specifications