Rear Seat Backrest Cover and Upholstery, Fixed
Rear Seat Backrest Cover and Upholstery, Fixed
Special tools, testers and auxiliary items required
• Upholstery clip pliers (V.A.G 1634)
1 Cover
• Removing
- Remove seat bench => [ Bench Seat ] Rear Seats.
- Remove the backrest => [ Rear Seat Backrest, Fixed ] Rear Seats.
- Remove center armrest=> [ Center Armrest, Fixed Rear Seat Backrest ] Rear Seats.
- Cut upholstery clips - 2 -.
On vehicles with side airbag:
- Pry fastening strip - 4 - out with a screwdriver.
- Remove bolts - 7 - (Qty. 2).
- Pull side airbag - 6 - downward out of protective cover - 5 -.
- Remove side airbag on opposite side the same way.
All:
- Remove cover and cushion from backrest frame.
- Install cover - 1 -.
- Cut upholstery clips - 2 -.
- Remove cover - 1 -.
• Installing
Install cover and upholstery in reverse order of removal. When doing so, note the following:
- When installing new upholstery clips, use Upholstery Clip Pliers (V.A.G 1634).
2 Upholstery clips
3 Upholstery
4 Retaining strip
5 Protective cover for side airbag
6 Side Airbag
7 Screws, (Qty. 2)
• Tightening specification 8 Nm