Seat Pan Cover and Upholstery, Standard Seat

Seat Pan Cover and Upholstery, Standard Seat

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Cover and Upholstery, Separating from Seat Pan





1 Cover and upholstery

• Removing

- Remove the seat. Refer to => [ Power Front Memory Seat ] Power Front Memory Seats.

- Remove side trim on sill side. Refer to => [ Sill Side Trim ] Power Front Memory Seats.

- Remove side trim on tunnel side. Refer to => [ Tunnel Side Trim ] Power Front Memory Seats.

- Remove drawer. Refer to => [ Drawer, through 06.2006 ] Power Front Memory Seats.

- Remove the backrest. Refer to => [ Front Backrest ] Power Front Memory Seats.

- Remove the screws - 3 - (2x).

- Remove bracket - 2 -.

- Disconnect connector for seat heater - 7 -.

- Remove clip - 4 -.

- Pry out grip channels - 5 - all around.

- Remove cover and upholstery - 1 -.

• Installing

To install, perform the steps used in removal in reverse order.

2 Retainer

3 Screws

Quantity: 2

4 Clip

5 Peripheral Fastening Strips

6 Tab

7 Seat heating Connector

Cover, Separating from Upholstery





1 Cover

• Removing

- Cut the upholstery clips - 2 -.

- Remove cover - 1 -.

• Installing

Installation is in reverse order of removal. Be sure to note the following:

- When installing new upholstery clips, use (V.A.G 1634).

2 Upholstery Clips