Brakes, Testing, All Wheel Drive
Brakes, Testing, All Wheel Drive
Testing on a one-axle roller test stand for AWD vehicles
During this test, the wheels of one axle are driven in opposite directions, to prevent delivering power to the other axle.
The test speed must not exceed 6 Km/h, otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).
CAUTION!
If the test speed exceeds 6 km/h the Torsen differential will be destroyed!
The Audi approved test stands fulfill these requirements.
Testing on a one-axle roller test stand
The test speed must not exceed 6 Km/h, otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).
The Audi approved test stands fulfill these requirements.