Passenger Side Instrument Panel Vent
Passenger Side Instrument Panel Vent
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
• Hook (3438)
• Watchmaker screwdriver
Removing
- Carefully unclip trim panel with (3409) from instrument panel - arrow -.
• If trim panel cannot be removed as described, you must remove the glove compartment and disengage trim panel clips from behind.
• The instrument panel vent has a hole on both sides for attaching the (3438).
- Carefully pull instrument panel vent out of installation opening on both sides using (3438).
If instrument panel vent cannot be removed, proceed as follows:
- Position instrument panel vent blades so they are horizontal.
- Release 2 clips - arrow - total by inserting watchmaker screwdrivers - 1 -.
- Pull instrument panel vent out of installation opening on both sides using (3438), thereby keeping watchmaker screwdrivers inserted.
- Disconnect electrical connector on instrument panel vent, if equipped.
Installation
Installation is reverse of removal, but note the following:
- Press instrument panel vent until locking tabs engage in installation opening.