Steering Column Adjustment Switch

Steering Column Adjustment Switch

Special tools, testers and auxiliary items required

• Special Screwdriver (T40056 A)

Removing

- Remove lower instrument panel cover on driver's side.

- Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.

- Remove bolts - 3 - and - 4 - using (T40056 A).





• Disregard item - 5 -.

- Remove Torx bolts - 6 -.

- Disconnect upper trim - 2 - for steering column switch from lower trim - 1 - and remove both sections.

- Disconnect electrical harness connector at lower trim.

• For the sake of illustration, shown with steering wheel removed.

- Remove bolts - arrows -.





- Remove steering column adjustment switch (E167) - 1 - upward from bottom trim.

Installing

Install in reverse order of removal, observing the following:

- Insert top trim piece for steering column switch into catches of bottom trim piece, press together and bolt.

- Install lower instrument panel cover on driver's side.

Tightening Specifications