Mirror Adjustment Switch
Mirror Adjustment Switch
Removing
- Switch off ignition and remove ignition key.
- Remove front door trim.
- Release retaining spring - 1 - and push electrical harness connector - 2 - out of bracket - arrow -.
- Disconnect electrical harness connector at mirror adjustment switch.
- Remove the screws - 3 - and - 4 - and - 6 through 12 -.
- Remove armrest and disconnect electrical harness connector - 5 - for window regulator switch.
- Remove bolts - arrows -.
- Remove switch mount cover - 1 - from armrest.
- Disconnect electrical harness connector - 1 - at mirror adjustment switch - 2 -.
- Carefully release catches - arrows - using a small screwdriver.
- Pull mirror adjustment switch downward out of switch mount.
Installing
Install in reverse order of removal, observing the following:
• When installing, make sure that symbol panel is inserted in front of mirror adjustment switch.
- Press switch into switch mount until fasteners engage.
- Install front door trim.
Tightening Specifications