Closing Assist
Closing Assist
1 Bolt
• 2.5 Nm
2 Left rear closing assist motor (V307)
• Disengaging and engaging, refer to
• Remove the screws and remove the motor from the mount
3 Mount
• To remove disconnect the cable on the motor from the door lock
• Lift the tabs - arrows - with a screwdriver and remove the motor from the mount
• When installing, the tabs must audibly engage
4 Cable
• When installing, the cable grommet must be pushed completely onto the mount.
5 Rear Door
Cable, Disconnecting and Connecting
- Unclip the cable - arrow - and pull it out of the guide.
- Guide the cable - 1 - out of the cable spool - 2 -.
- Install the cable nipple first into the cable spool.
- Guide the cable inside the groove on the spool 360°.
- Insert the cable into the guide and lock it with the hooks.
- Push the grommet completely into the mount.