Seat Adjustment Switch

Power Front Memory Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Power Front Memory Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.



Seat Adjustment Switch

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)

• Fixture for seat repair (VAS 6136)

• Removing

- Remove seat => [ Power Front Memory Seat ].

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove seat side trim on sill side => [ Side Trim, Sill Side ].

- Remove bolts - 5 - (5x).





- Remove seat adjustment - 2 -.

- Remove circuit board with connectors - 1 -.

• Installing

To install, perform the steps used in removal in reverse order. When doing so, note the following:

• Tightening specifications for bolts - 5 -: 1.5 Nm