Fuel Filter
Fuel Filter
Special tools, testers and auxiliary items required
• Reservoir
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] [1][2]Fuel Injection System.
- Remove right rear cover - 1 - next to fuel tank.
- Place the drip tray under the fuel filter.
CAUTION!
There is a risk of injury because the fuel is under high pressure.
• To reduce pressure in fuel system, lay a clean cloth around the connector and carefully loosen connector.
- Disconnect fuel lines - 1 -, - 2 - and - 4 - by pressing the release buttons.
- Remove bolts - 3 -.
- Remove fuel filter.
• Shown in illustration on a vehicle with front wheel drive.
Installing
• Tightening specifications, refer to => [ Fastener Tightening Specifications ] Fuel Supply System - Fastener Tightening Specifications.
Installation is performed in the reverse order of removal, noting the following:
Installed location:
• The direction of flow is marked on filter housing with arrows.
• Distance - a - = 10 to 14 mm between fuel return line at fuel filter and fuel tank.