High Pressure Pump Assembly Overview
High Pressure Pump Assembly Overview
1 High pressure pump
• Removing and installing, refer to => [ High Pressure Pump ] High Pressure Pump
2 Bolt
• 9 Nm
3 Seal
• Replace
4 Locking bolt
• 10 Nm
5 High-pressure line
CAUTION!
• Fuel system is under high pressure! Before opening high pressure components of the fuel injection system, pressure must be relieved to residual pressure. Refer to => [ Before Opening High Pressure Fuel Injection System ] Service and Repair.
• Then wrap a clean rag around the connection and relieve residual pressure by carefully loosening the connection.
• Observe safety precautions when disconnecting the battery.
• Connectors should not show any signs of damage
• Do not change bent shape
• 25 Nm
6 High pressure line (fuel supply line)
CAUTION!
• Fuel system is under high pressure! Before opening high pressure components of the fuel injection system, pressure must be relieved to residual pressure. Refer to => [ Before Opening High Pressure Fuel Injection System ] Service and Repair.
• Then wrap a clean rag around the connection and relieve residual pressure by carefully loosening the connection.
• Observe safety precautions when disconnecting the battery.
• Connectors should not show any signs of damage
• Do not change bent shape
• 25 Nm
7 O-ring
• Replace
8 Roller tappet