Level Control System Control Module

Level Control System Control Module

Removing

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051 A)

- If control module is replaced, select "Replace" function for respective control module in "Guided Fault Finding".

• The level control system control module (J197) is installed on the bulkhead behind the glove compartment.

- Remove the cover - A - from the lower glove compartment cover - B -.






• The cover - A - is secured by 4 retainers in the lower glove compartment cover - B -. These retainer can be difficult to remove, therefore be careful not to damage them when removing the lower glove compartment cover - B -.

- Remove bolts - 1 -.






- Remove the control module - 2 - downward.

- Release and remove the connectors - arrows - from the control module.

- Remove control module - 2 -.

Installing

Install in reverse order of removal. Note the following:

- Connect the electrical connectors - arrows -.






- Install the bolts - 1 - and tighten to 2 Nm.

- Level control system control module, adapting, refer to => [ Level Control System Control Module, Programming ] Level Control System Control Module, Programming.