Fuel Level Sensor
Fuel Level Sensor
Removing
• All cable ties which are opened or cut open when removing, must be replaced in the same position when installing.
Observe safety precautions. Refer to => [ Safety Precautions ] Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] [1][2]Fuel Injection System.
- Remove fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.
- Cut the cable ties - 2 - and separate the electrical connection - 1 -.
- Release the retaining tabs - arrows - with a screwdriver and pull the fuel level sensor upward and out.
Installing
Installation is performed in the reverse order of removal, noting the following:
• During installation, the cable ties must be re-installed at the same location.
- Insert fuel level sensor in the guides on the fuel delivery unit and push down until it engages.
- Connect the electrical connection and check that it is securely engaged.
- Install fuel delivery unit , observing notes for connecting battery. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.